SILENT KNIGHT 5084 Manual de Instalação descarregar pdf (Página 16)

Installation Instructions

151174 3-5

3.3 Flush Mount

Note: In order to flush mount the unit, the wall must be at least 3-1/2 inches thick.

1. Make a hole in the wall near a stud at the desired location. This hole should be 11-1/4

inches wide and 11 inches high.

2. If the studs are farther apart than the width required, attach some shims to the stud inside

the wall so that the shims and the first stud are the right width.

3. Screw the back box to the stud on one side and the shims on the other. Three holes are pro-

vided in each side flange of the back box (see Figure 3-3).

Figure 3-3 Flush Mounting

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 57 58

Sem comentários

SILENT KNIGHT 5084 Manual de Instalação Página 16