SILENT KNIGHT 5084 Manual de Instalação descarregar pdf (Página 37)

Series 5000 Entry System Installation/Operation Manual

4-4 151174

11. Press any key other than * or # to toggle between yes or no.

12. Press *. The display shows HIDE CODES ?

YES or NO.

YES = Hide access & keyless entry codes while entering them

NO = Show access code & keyless entry code while entering them

13. Press any key other than * or # to toggle between yes or no.

14. Press *. The display shows * BEFORE 6

YES or NO

YES = visitor must press * before tenant can open door by pressing 6.

NO = tenant just needs to press 6.

This feature is used to prevent unauthorized entry using a TouchTone beeper to activate

doorstrike.

15. Press any key other than * or # to toggle between yes or no.

16. Press *. The display will show PBX ACCESS #

XX. X = a number from 0-9.

17. Enter the number (up-to two digits) necessary to access a PBX system.

This may be necessary for phone lines that are run through a PBX system.

18. Press *. The display shows USER # LENGTH

X = a number from 1-8 which is the number of digits to be used on the user directory.

19. Enter 1, 2, 3, or 4 depending on the number of digits to be used on the user directory.

20. Press *. The display shows CALL LENGTH

1-255.

This is how much time is allowed between the time the system is finished dialing and the

time it automatically hangs-up, 1-255 seconds.

21. Enter the Call Length time.

22. Press *. The display shows DOOR TIME

1-255.

This selects the length of time (1-255 seconds) the door relay will be activated for entry.

23. Enter the Door Time.

24. Press *. The display shows AUX TIME

1-255

This selects the length of time (1-255 seconds) the auxiliary relay will be activated. If aux

relay is programmed as Alarm or Ground Start, aux time is ignored.

25. Enter the auxiliary relay time.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 57 58

Sem comentários

SILENT KNIGHT 5084 Manual de Instalação Página 37